Nov 27 2005 - 12:00am

With the drivers side of the engine being reserved for the supercharger, I needed to get AC, Alternator and Power Steering all down the passenger side. The stock brackets hit the A arms, so I found a Street and Performance set that put the AC low, but would not clear the frame. I really wanted AC...

Nov 20 2005 - 12:00am

It's getting cold now, so it's not as much fun spending time in the garage. The temperature outside was down as low as -2 in the mornings according to the gauge in the car and no heating doesn't help. I got a few hours on it on Saturday and finished off the rear window trim before going through t...

Nov 13 2005 - 12:00am

I had a day off work on Friday, so made the most of some garage time. I got the Chevy out into the daylight and turned it round in the street. It's the furthest the car has been for a long time. I took the opportunity to have a big clean up in the garage as well and to make some space for the old...

Nov 6 2005 - 12:00am

I made a start on the vent windows on Saturday. The rubber seals must have been the original ones, and had gone rock hard. They were covered in silicone sealant as well just to make it even harder to clean up. I ended up cutting it up with a knife and scraping it out piece by piece. The bench gri...

Oct 29 2005 - 11:00pm

I only had a couple of hours to work on the car today, so made the most of it. Poppy wanted to help me as well, so she came out and vacced the car and kept me company. I'd painted the brake pedal assembly with Hammerite last night, so hung that in place and fitted the booster. Poppy thought the p...

Oct 28 2005 - 11:00pm

The weather was a bit iffy today, and I wanted to get the other doors done and sort the boot springs. I wheeled it outside and propped up the boot with a broom to have a look at the springs. They need to be hooked in on one side and then twisted to hook into the other. It's quite hard to do if yo...

Oct 22 2005 - 11:00pm

I carried on with the assembly this weekend, the plan was to do the dash paint and then crack on with the trim. I needed to paint the ashtray too which I was convinced I'd primed. When I dug it out i had cleaned it up but not painted it. I decided to leave it until I paint the other bits that nee...

Oct 15 2005 - 11:00pm

I got a load of bits through from the US on Friday, and the house is starting to look more like a parts store than a house. One of the bits that arrived was the rack and pinion steering. I didn't want to have it sat around for ages, so I pulled the original steering off and bolted it in on Saturd...

Oct 8 2005 - 11:00pm

The weather was great on Sunday, so I wheeled the car out to give it a wash and colour sand it. When it was washed it looked great and I felt proud of it. There was plenty of dust in it to sand out tho, so I started blocking it down. There are a few little ripples and marks in the finish, and as...

Oct 1 2005 - 11:00pm

With the body all painted, I wanted to get the last few bits and pieces that needed painting done. One of the bits that needed doing was the side moldings which had the inserts painted black. and badly at that. I went and bought a cheap bench grinder, a wire brush and a polishing kit for it, and...