I started out finish welding last weeks work slowly working from side to side and letting it all cool before doing any more.It was all going well, and I cut the edges of the old pedal hole so that I could bring it intol line with the new panel I'd made. After a few tacks, I bent the floor back in to meet the new edge and sliced up the edge into pieces to tack it at the right angle. With the cab loose, I couldn't get enough pressure to get the floor back straight at the floor and firewall joint but its pretty much straight on the pedal cover. Just before I did the last inch of seam weld, I ran out of gas. With my welding done for the day I ground down the welds before getting the orbital sander to start getting it all nice and smooth, The sander showed up the high and low spots so I dollied it back into shape as best I could and carried on.